Our Services

A complete range of industrial equipment repairs, exchanges and sales

Precision Zone provides sales, exchange and repair services for a wide variety of industrial controls and components used in CNC, Robotics, Motion Control and related applications

Our product range includes AC Drives, Motors, Controls, Encoders, Circuit Boards, Power Supplies, Operating Panels, Monitors, LCD Retrofits, a wide assortment of semiconductor parts and equipment accessories.

We offer:

Free evaluation for all repair orders
Full cycle testing and repair services
Competent technical support
Engineering support for advanced and custom solutions

We support CNC, Robotics, Motion Tools and many related industries.

To minimize your equipment downtime, we offer rush repair options. Standard Repair Time: 1-2 Weeks. Rush Service Surcharges:

$100.00 – 3 Day Repair
$150.00 – 2 Day Repair
$250.00 – Next Day Repair
$400.00 – Same Day Repair

All products are covered by our comprehensive warranty. Warranty terms and conditions are product specific.

Repairs

Our engineers offer over 60 years of combined industry expertise. We have fully functional robots, CNC machines and simulators for true dynamic testing.

Exchanges

For most products we offer exchange options. Once you receive and install the exchange unit, please return the original unit for evaluation and core credit.

Component Sales

We sell new and fully reconditioned, tested and warranted equipment. Contact us prior to purchase to confirm software versions where applicable.

RECENTLY REPAIRED PRODUCTS

SGDH-20AE is an
Drives-AC Servo manufactured by Yaskawa
Discovered issues: Parameter/Setting Adjustment
Servo Amplifier Type: SGDH Sigma II
Rated Output: 2.0kW (2.7HP)
Power Supply: 200V
Model: Speed, Torque, and Position Control
Options: Three Phase
Modification: None

S82J-60024 is an
Part of machine manufactured by Omron
Discovered issues: Bad DC Bus Capacitor(s), Bad Output Section, Leaky Capacitors (Open, Corroded Traces), Open Resistor(s)

SLPWED139 is an
Part of machine manufactured by Hitachi Seiki
Discovered issues: Bad DC Bus Capacitor(s), Bad Output Section, Leaky Capacitors (Open, Corroded Traces), Open Resistor(s) Description: Hitachi Seiki SLBUS Power Supply

CACR-IR15SB is an
Drives-AC Servo manufactured by Yaskawa
Discovered issues: Bad Capacitor(s), Bad DCCT, Bad Gate Section/Board, Bad Input Circuit Breaker, Bad Output Transistors/SCRs, Bad Power Section/Board, Excessive Dirt/Debris, Leaky Capacitors (Open, Corroded Traces)
Drive Type: CACR AC Servo Drive
Control Type: Current Control
Rated Output Capacity: 1.5kW
Axis Specification: 1 Axis
Application: For CNC, Analog, Through-hole Mounted

MDS-DH-CV-300 is an
Drives-AC Spindle manufactured by Mitsubishi
Discovered issues: Bad Cooling Fans, Bad Circuit Board Component(s)
Unit Type: MDS-DH-CV AC Converter/Power Supply for MDS-DH Systems
Power Supply Capacity: 30.0kW

CACR-SR10SB1-A-B-F is an
Drives-AC Servo manufactured by LG
Discovered issues: Bad Capacitor(s), Bad Gate Section/Board, Bad Input Circuit Breaker, Bad Output Transistors/SCRs, Bad Power Section/Board, Excessive Dirt/Debris, Leaky Capacitors (Open, Corroded Traces)

CIMR-G5U25P5 is an
Inverter-General Purpose manufactured by Yaskawa
Discovered issues: Bad Output Transistors/SCRs, Bad Fuse, Bad Gate Section/Board
Drive Type: AC Inverter
Series: G5
Country Code: USA
Input Voltage: 230V
Output Power: 5.5kW

SGMG-13A2ABC is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Encoder
Servomotor Type: SGMG
Rated Output: 1.3kW (1.7HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Straight with key and one shaft-end tap
Options: 24 VDC Brake

MDS-C1-V1-45 is an
Drives-AC Servo manufactured by Mitsubishi
Discovered issues: Bad Circuit Board Component(s), Bad Cooling Fans, Excessive Dirt/Debris, Leaky Capacitors (Open, Corroded Traces)
Drive Series: MDS-C1 AC Servo
Number of Axes: 1-axis
Rated Capacity & Dynamic Braking Specification: 4.5kW; Built-in
Enclosure Type: Standard

A16B-1212-0100-01 is an
Part of machine manufactured by Fanuc
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Bad Output Section, Leaky Capacitors (Open, Corroded Traces), Open Resistor(s)

MR-J2-40A is an
Drives-AC Servo manufactured by Mitsubishi
Discovered issues: Bad Circuit Board Component(s), Missing parts/components
Drive Type: MR-J2 AC Servo Amplifier
Rated Output: 400 W
Interface: General Purpose Interface
Power Supply: Three-phase AC 200-230V
Modification: None

A06B-6047-H004 is an
Drives-DC Servo manufactured by Fanuc
Discovered issues: Bad Control Section/Board, Bad DC Bus Capacitors, Bad Magnetic Contactor, Relay
Part Group: Motors and Drives
Series: DC Analog Servo Amplifier Module/Analog input
Part Type: Drive
Number of Axes: 1-Axis
Model: 04

SGDH-10AE is an
Drives-AC Servo manufactured by Yaskawa
Discovered issues: Bad Circuit Board Component(s), Bad Cooling Fans, Bad Power Section/Board, Excessive Dirt/Debris
Servo Amplifier Type: SGDH Sigma II
Rated Output: 1.0kW (1.3HP)
Power Supply: 200V
Model: Speed, Torque, and Position Control
Options: Three Phase
Modification: None

USAFED-03FS1S is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Encoder, Bad Encoder Bearings, Bad Feed Back Connector, Bad DE Bearing, Bad Feed Back Connector, Bad ODE Bearing
Servomotor Type: US
Series: F Series
Enclosure: Totally-enclosed, Self-cooled Type
Magnet Type: Ferrite
Motor Output: 0.3kW (0.4HP)
Design Revision Order: F
With Encoder: 8192 P/R Absolute
Shaft Type: Taper
Drive End Specification: With oil seal
Opposite Drive End Specification: Standard (blank)

CIMR-M5A20150 is an
Drives-AC Spindle manufactured by Yaskawa
Discovered issues: Parameter/Setting Adjustment
Spindle Inverter: CIMR
Series: M5 Inverter
Specification: Stand-alone Drive
Voltage Class: 200V
Max. Applicable Motor Output: 15kW (20HP)
Enclosure: Open chassis type (with fan)

SGDH-30DE is an
Drives-AC Servo manufactured by Yaskawa
Discovered issues: Bad Circuit Board Component(s), Bad Cooling Fans, Bad Fuse, Bad Power Section/Board, Excessive Dirt/Debris, Bad Precharge Resistor
Servo Amplifier Type: SGDH Sigma II
Rated Output: 3.0kW (4.0HP)
Power Supply: 400V
Model: Speed, Torque, and Position Control
Options: Three Phase
Modification: None

SGDH-60DE is an
Drives-AC Servo manufactured by Yaskawa
Discovered issues: Bad Circuit Board Component(s), Bad Cooling Fans, Bad Power Section/Board
Servo Amplifier Type: SGDH Sigma II
Rated Output: 6.0kW (8.0HP)
Power Supply: 400V
Model: Speed, Torque, and Position Control
Options: Three Phase
Modification: None

A20B-1001-0160-04A is an
Part of machine manufactured by Fanuc
Discovered issues: Bad Output Section, Leaky Capacitors (Open, Corroded Traces), Open Resistor(s)

32-4070 is an
Drives-DC Servo-Spindle-PCB manufactured by HAAS
Discovered issues: Passed Testing - Highly Recommend Recondition

CPCR-MR-CA224KB is an
Drives-DC Servo-Spindle-PCB manufactured by Yaskawa
Discovered issues: Bad Capacitor(s), Bad Gate Section/Board, Bad Power Section/Board, Excessive Dirt/Debris, Leaky Capacitors (Open, Corroded Traces) Description: Yaskawa | Drives-DC Servo-Spindle-PCB |

SGMGH-55ACA6E is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad Encoder Bearings, Bad ODE Bearing, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMGH Sigma II
Rated Output: 5.5kW; 1500RPM
Power Supply: 200V
Encoder Specifications: 17-bit Incremental Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: 24VDC Brake and Shaft Seal

USAGED-05A22K is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn ODE Housing
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 0.5kW (0.6HP)
Design Revision Order: A
With Encoder: 8192 P/R Incremental
Shaft Type: Straight
Drive End Specification: With keyway
Opposite Drive End Specification: Standard (blank)

CIMR-MTIII-15K.2 is an
Drives-AC Spindle manufactured by Yaskawa
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Gate Section/Board, Bad Output Transistors/SCRs
Drive Type: Spindle Inverter
Series: VS-626MTIII
Max. Applicable Motor Output: 15kW
Option: .2 without fan

UAASKA-06DMU21 is an
Motors-AC Spindle manufactured by Yaskawa
Discovered issues: Bad Coil Insulation, Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn DE Housing