Precision Zone Expertly Repairs Okuma AC Spindle Drives

Here at Precision Zone, we pride ourselves on being your experts in a multitude of industrial products from a wide range of manufacturers. Okuma is one of the manufacturers that we specialize in. Our repair expertise extends to Okuma spindle drives.

All Okuma spindle drives are repaired internally by our team of highly skilled engineers and repair technicians. With quick and flexible service, decades of industry experience, superior technical knowledge, and support, Precision Zone is your go-to for your repairs on industrial electronics and equipment.

Benefits of Okuma Spindle Drive Repair by Precision Zone

  • Free Quotes and Evaluations
  • Competitive Pricing
  • 1-Year Warranty on Our Parts and Labor
  • Flexible Rush Repair Options

Recently Repaired Products

Okuma MIV45-3-V1 image MIV45-3-V1 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Excessive Dirt/Debris, Bad Circuit Board Component(s), Bad Control Section/Board, May Require Board Replacement
Drive Type: MIV Inverter Spindle
Capacity: 45kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 1

Okuma MIV04-3-V1 image MIV04-3-V1 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Control Section/Board
Drive Type: MIV Inverter Spindle
Capacity: 4.0kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 1

Okuma VACIV-D11 image VACIV-D11 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Gate Section/Board
Drive Type: VACIV AC Spindle Drive
Rated Capacity: 11kW

Okuma VAC-III D6 image VAC-III D6 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s), Bad Gate Section/Board, Bad Magnetic Contactor, Relay, Bad Output Transistors/SCRs, Bad Power Section/Board, Blown Circuit Board (Through Hole), Blown Input Power Components, May Require Board Replacement
Drive Type: VAC-III AC Spindle Drive
Rated Capacity: 6kW

Okuma MIV22-3-V1 image MIV22-3-V1 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s), Bad DCCT
Drive Type: MIV Inverter Spindle
Capacity: 22kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 1

Okuma VAC-III D11 image VAC-III D11 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Cooling Fans
Drive Type: VAC-III AC Spindle Drive
Rated Capacity: 11kW

Okuma VAC-II D22A image VAC-II D22A is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Blown Input Power Components
Drive Type: VAC-II AC Spindle Drive
Rated Capacity: 22kW
Design Revision Order: A

Okuma VAC-I D8-A image VAC-I D8-A is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Gate Section/Board, Leaky Capacitors (Open, Corroded Traces), Bad Magnetic Contactor, Relay
Drive Type: VAC-I AC Spindle Drive
Rated Capacity: 8kW
Design Revision Order: A (Control board is E4809-045-084-D or higher)

Okuma MIV08-3-V5 image MIV08-3-V5 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s)
Drive Type: MIV Inverter Spindle
Capacity: 7.5kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 5

Okuma VAC-III D22 image VAC-III D22 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Gate Section/Board, Bad Output Transistors/SCRs, Physical Damage to the Drive
Drive Type: VAC-III AC Spindle Drive
Rated Capacity: 22kW

Okuma MIP11 D-11 image MIP11 D-11 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Cooling Fans

Okuma VAC5-D22-AIF image VAC5-D22-AIF is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Gate Section/Board, Bad Output Transistors/SCRs, Excessive Dirt/Debris
Drive Type: VAC5 AC Spindle Drive
Rated Capacity: 22kW
Interface: Analog interface unit type

Okuma MIP22 D-22 image MIP22 D-22 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Leaky Capacitors (Open, Corroded Traces)

Okuma VAC-II D8A image VAC-II D8A is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s), Bad Gate Section/Board
Drive Type: VAC-II AC Spindle Drive
Rated Capacity: 8kW
Design Revision Order: A

Okuma VAC-I D11 image VAC-I D11 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s), Bad Magnetic Contactor, Relay, Bad Power Board, Bad Precharge Resistor, Excessive Dirt/Debris
Drive Type: VAC-I AC Spindle Drive
Rated Capacity: 11kW
Design Revision Order: None (Control board is E4809-045-084-A/B/C only)

Okuma MIV22-3-V5 image MIV22-3-V5 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Output Transistors/SCRs
Drive Type: MIV Inverter Spindle
Capacity: 22kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 5

Okuma MIV22-3-V3 image MIV22-3-V3 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s)
Drive Type: MIV Inverter Spindle
Capacity: 22kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 3

Okuma VACIV-D22 image VACIV-D22 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Cooling Fans, Bad Fuse, Bad Gate Section/Board, Bad Output Transistors/SCRs, Leaky Capacitors (Open, Corroded Traces)
Drive Type: VACIV AC Spindle Drive
Rated Capacity: 22kW

Okuma MIV15-3-V1 image MIV15-3-V1 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s), Bad Cooling Fans
Drive Type: MIV Inverter Spindle
Capacity: 15kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 1

Okuma MIV06-3-V3 image MIV06-3-V3 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s)
Drive Type: MIV Inverter Spindle
Capacity: 6.0kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 3

Okuma MIV06-3-V1 image MIV06-3-V1 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s), Bad Cooling Fans, Bad Output Transistors/SCRs
Drive Type: MIV Inverter Spindle
Capacity: 6.0kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 1

Okuma VAC-II D30A image VAC-II D30A is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Capacitor(s), Bad Circuit Board Component(s)
Drive Type: VAC-II AC Spindle Drive
Rated Capacity: 30kW
Design Revision Order: A

Okuma MIV06-3-V5 image MIV06-3-V5 is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Circuit Board Component(s)
Drive Type: MIV Inverter Spindle
Capacity: 6.0kW
Inverter Control Board Type: ICB3
Motor Type: VAC Motor / IPM motor
Control ROM Type: 5

Okuma VAC-I D22-A image VAC-I D22-A is an
Drives-AC Spindle manufactured by Okuma
Discovered issues: Bad Output Transistors/SCRs
Drive Type: VAC-I AC Spindle Drive
Rated Capacity: 22kW
Design Revision Order: A (Control board is E4809-045-084-D or higher)