YASKAWA MOTOR REPAIR SPECIALISTS

PRECISION ZONE IS PREFERRED YASKAWA REPAIR VENDOR

Every Yaskawa motor sent to us is individually inspected by a Precision Zone technician. Our technicians are trained on Yaskawa machines and fully understand the complexity and unique features of Yaskawa machines. Each repair consists of:

  • Completely disassembling the motor and cleaning from debris, contaminants or corrosion.
  • Visual Evaluation is performed examining damaged or missing parts
  • Static Check
  • Baker Surge Test looking at the windings
  • Manufacturer Specific Test Equipment
  • Load Testing

BENEFITS OF PRECISION ZONE REPAIRS

Precision Zone's 72,000 sq foot facility is equipped to handle any industrial electronics repair. We have all the necessary tools to evaluate and repair your motor from multimeter and IR cameras, to megohm and oscilloscopes. Our large inventory of spare parts guarantees a quick turn-around. Precision Zone has custom built simulators to test the motor in real-life conditions once the repair is complete. This means once your motor arrives back all you have to do is install it and you're back in business.

  • FREE evaluation by expert technicians
  • FREE job estimate
  • Dedicated technical support for all customers
  • 12 mos warranty
  • Flat Price
  • Exchange option
  • Rush Service

Recently Repaired Products

Yaskawa SGMAH-08AAN21 image SGMAH-08AAN21 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing
Servomotor Type: SGMAH Sigma II
Rated Output: 750W (1.0HP)
Power Supply: 200V
Encoder Specifications: 13-bit (2048 x 4) Incremental Encoder; Standard
Revision Level: NEMA Flange (200W, 400W, 800W only without holding brake)
Shaft Specifications: Straight shaft without keyway
Accessories: Standard; without brake
Option: None
Type: none

Yaskawa USAFED-09FB1S image USAFED-09FB1S is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Coil Insulation
Servomotor Type: US
Series: F Series
Enclosure: Totally-enclosed, Self-cooled Type
Magnet Type: Ferrite
Motor Output: 0.9kW (1.1HP)
Design Revision Order: F
With Encoder: 5000 pulses/rev Incremental
Shaft Type: Taper
Drive End Specification: With oil seal
Opposite Drive End Specification: Standard (blank)

Yaskawa SGMGH-13ACA6C image SGMGH-13ACA6C is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn Brake Needs Reconditioning
Servomotor Type: SGMGH Sigma II
Rated Output: 1.3kW; 1500RPM
Power Supply: 200V
Encoder Specifications: 17-bit Incremental Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: 24VDC Brake

Yaskawa SGMPH-01A1A-YR21 image SGMPH-01A1A-YR21 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad Encoder, Bad ODE Bearing, Passed Testing - Highly Recommend Recondition, Worn Brake Needs Reconditioning

Yaskawa SGMG-30A2AAF image SGMG-30A2AAF is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMG
Rated Output: 3.0kW (4.0HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Standard (straight without key, when options not blank)
Options: 90 VDC brake, Oil seal

Yaskawa SGMAS-C2ACA2C image SGMAS-C2ACA2C is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Brake, Bad DE Bearing, Bad ODE Bearing
Servomotor Type: SGMAS AC Servomotor
Rated Output: 0.15kW
Supply Voltage: 200V
Encoder Specification: 17-bit Incremental Encoder
Design Revision Order: A
Shaft End Specification: Straight without key
Options: With 24 VDC Brake

Yaskawa SGMGH-44DCA6C image SGMGH-44DCA6C is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad ODE Bearing, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMGH Sigma II
Rated Output: 4.4kW; 1500RPM
Power Supply: 400V
Encoder Specifications: 17-bit Incremental Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: 24VDC Brake

Yaskawa SGMAH-08AAF41 image SGMAH-08AAF41 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad Encoder, Bad ODE Bearing
Servomotor Type: SGMAH Sigma II
Rated Output: 750W (1.0HP)
Power Supply: 200V
Encoder Specifications: 13-bit (2048 x 4) Incremental Encoder; Standard
Revision Level: F
Shaft Specifications: Straight shaft with keyway (not available with revision level N)
Accessories: Standard; without brake
Option: None
Type: none

Yaskawa SGMG-09A2AB image SGMG-09A2AB is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad ODE Bearing, Worn ODE Housing, Bad Encoder Bearings
Servomotor Type: SGMG
Rated Output: 0.9kW (1.2HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Straight with key and one shaft-end tap
Options: Standard

Yaskawa USAGED-05A22T image USAGED-05A22T is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Coil Insulation, Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Bad Power Connector
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 0.5kW (0.6HP)
Design Revision Order: A
With Encoder: 8192 P/R Incremental
Shaft Type: Straight
Drive End Specification: With keyway & oil seal
Opposite Drive End Specification: Standard (blank)

Yaskawa SGMG-55A2AAG image SGMG-55A2AAG is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Bad Power Connector, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMG
Rated Output: 5.5kW (7.5HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Standard (straight without key, when options not blank)
Options: 24 VDC brake, Oil seal

Yaskawa SGMGV-44D3A61 image SGMGV-44D3A61 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMGV Sigma V High-torque type
Rated Output: 4.4kW
Power Supply Voltage: 400VAC
Serial Encoder: 20-bit Absolute
Design Revision Order: Standard
Shaft End: Straight with key and tap
Options: Without options
Control: Standard

Yaskawa SGMAV-08ADA2S image SGMAV-08ADA2S is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad Encoder Bearings, Bad ODE Bearing, Full of Oil Inside
Servomotor Type: SGMAV Sigma V Low-inertia and high dynamics
Rated Output: 750W
Power Supply Voltage: 200VAC
Serial Encoder: 20-bit Incremental
Design Revision Order: Standard
Shaft End: Straight without key
Options: With oil seal
Control: Standard

Yaskawa SGMGV-1ED3A6C image SGMGV-1ED3A6C is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Brake, Bad DE Bearing, Bad ODE Bearing, Worn DE Housing, Worn Shaft Keyway, Bad Condition - Requires Reconditioning
Servomotor Type: SGMGV Sigma V High-torque type
Rated Output: 15kW
Power Supply Voltage: 400VAC
Serial Encoder: 20-bit Absolute
Design Revision Order: Standard
Shaft End: Straight with key and tap
Options: With 24VDC holding brake
Control: Standard

Yaskawa SGMP-04A214S image SGMP-04A214S is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Bad Encoder, Bad Encoder Bearings, Bad Coil Resistance, Worn ODE Housing

Yaskawa SGMAS-C2AGA-SU12 image SGMAS-C2AGA-SU12 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing

Yaskawa SGMSH-10ACA61 image SGMSH-10ACA61 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing
Servomotor Type: SGMSH Sigma II
Rated Output: 1.0kW (1.3HP)
Power Supply: 200V
Encoder Specifications: 17-bit Incremental Encoder
Revision Level: A
Shaft Specifications: Straight with key and tap
Accessories: Standard

Yaskawa USAFED-13CA2 image USAFED-13CA2 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Coil Insulation - Due to Coolant/Moisture Contamination, Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing
Servomotor Type: US
Series: F Series
Enclosure: Totally-enclosed, Self-cooled Type
Magnet Type: Ferrite
Motor Output: 1.3kW (1.7HP)
Design Revision Order: C
With Encoder: 6000 pulses/rev Incremental
Shaft Type: Straight
Drive End Specification: None
Opposite Drive End Specification: Standard (blank)

Yaskawa SGMGH-1EDCA61 image SGMGH-1EDCA61 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder Bearings, Bad ODE Bearing, Bad Power Connector, Worn ODE Housing, Worn DE Housing
Servomotor Type: SGMGH Sigma II
Rated Output: 15.0kW; 1500RPM
Power Supply: 400V
Encoder Specifications: 17-bit Incremental Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: Standard

Yaskawa USAGED-13A22K image USAGED-13A22K is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn Shaft Keyway
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 1.3kW (1.7HP)
Design Revision Order: A
With Encoder: 8192 P/R Incremental
Shaft Type: Straight
Drive End Specification: With keyway
Opposite Drive End Specification: Standard (blank)

Yaskawa SGMGH-55DCA61 image SGMGH-55DCA61 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMGH Sigma II
Rated Output: 5.5kW; 1500RPM
Power Supply: 400V
Encoder Specifications: 17-bit Incremental Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: Standard

Yaskawa USAGED-05A22K image USAGED-05A22K is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing, Bad Condition - Requires Reconditioning
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 0.5kW (0.6HP)
Design Revision Order: A
With Encoder: 8192 P/R Incremental
Shaft Type: Straight
Drive End Specification: With keyway
Opposite Drive End Specification: Standard (blank)

Yaskawa SGMGV-13ADA61 image SGMGV-13ADA61 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Power Connector, Worn ODE Housing, Bad Coil Insulation - Due to Coolant/Moisture Contamination, Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad ODE Bearing
Servomotor Type: SGMGV Sigma V High-torque type
Rated Output: 1.3kW
Power Supply Voltage: 200VAC
Serial Encoder: 20-bit Incremental
Design Revision Order: Standard
Shaft End: Straight with key and tap
Options: Without options
Control: Standard

Yaskawa SGMGH-75D2A6C image SGMGH-75D2A6C is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Coil Insulation - Due to Coolant/Moisture Contamination, Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad ODE Bearing, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMGH Sigma II
Rated Output: 7.5kW; 1500RPM
Power Supply: 400V
Encoder Specifications: 17-bit Absolute Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: 24VDC Brake